Home | About Us | Contact Us | FAQ
 

Active Assistance Board | Repair Books | Store Finder  | Remote Controls for sale
   
 
Replacement remote controls Find your local Television, VCR, DVD, Hi-Fi etc repair service center, Select your country (US and UK only) Find you local repair store - Unisted States Store Finder Find your nearest repair shop / Technician - Store Finder, United Kingdom


 
 

 

Please note - If you are not a qualified repair technician the members of RepairHelper.com strongly recomends NOT trying to repair electrical equipment as it is extremely dangerous and can lead to Harm or Death! Please feel free to use our Repair Shop/Store Finder service to find qualified repair technicians in your local area.

 


 

Back To Board

 

Submitted By

darrell

Date Posted

8/5/2003 3:53:06 AM

Title

Panasonic CT-32G11U powers on and off while viewing

 

Message

TV will power off while viewing. I can hear a clicking noise when this happens. Usually takes about 5 min. to come back on. When problem first started, I could tap on front panal and tv would come back on. Now the tap will not work. Only after some time will tv come back on. I opened up case and could move the entire board and cause tv to power up and off again by doing this. Any ideas on what problem is. Thanks for any info. on this problem.

Submitted By

David

Date Posted

8/6/2003 3:48:50 AM

Title

RE: Panasonic CT-32G11U powers on and off while viewing

 

Message

Resolder Loose connection on the relay switch. Also while you are doing this check the degaussing THERMAL BLOCK to see if it might need a little resoldering. This can cause other problems so you should check it while you have the set apart. DAVID

Submitted By

Steve

Date Posted

6/23/2004 3:21:30 AM

Title

RE: Panasonic CT-32G11U powers on and off while viewing

 

Message

My television kept going off while viewing, also.  And, it did come on after a while.  Finally it went off and hasn't come back on.  When I push the off/on button I sometimes, not all the time, hear a faint click in the back, but it never comes on.  What is the course of action I need to take?  Help!!!!

 

Repairhelper Archives - Please note that this bulletin board is repairhelpers archived material and as such messages can no longer be replied to, but please feel free to browse this board for possible remedies to your repair questions.

Please goto Repairhelper.com to view our current 'Active' repair assistance board where you can post your own questions and browse our latest mssages/ replies.

 

 

©2003 SMG-Development & Repair Helper | Terms and Disclaimer | Site Map