|
Please
note - If you are not a qualified repair technician the members
of RepairHelper.com strongly recomends NOT trying to repair electrical
equipment as it is extremely dangerous and can lead to Harm or Death!
Please feel free to use our Repair Shop/Store Finder service to find qualified repair
technicians in your local area.
Back To Board |
|
Submitted By |
Eddie
|
Date Posted |
8/12/2003 4:55:02 PM |
Title |
mitsubishi vs60va2 bowed screen on top & bottom |
Message |
| At the top, the picture starts at the corners then bows down towards the center, then on the bottom, the picture starts at the corners and then bows up towards the center. |
|
Submitted By |
Dave
|
Date Posted |
8/14/2003 4:10:38 AM |
Title |
RE: mitsubishi vs60va2 bowed screen on top & bottom |
Message |
| I've got a similar problem except is bowed on the sides of the picture. Mitsubishi CS-2724R. Did you ever find a fix? |
|
Submitted By |
Rick
|
Date Posted |
8/17/2003 8:45:55 PM |
Title |
RE: mitsubishi vs60va2 bowed screen on top & bottom |
Message |
| Also curious if you found a fix - same problem - same model number - same everything - -
Thanks, Rick |
|
Submitted By |
roger
|
Date Posted |
11/21/2003 9:53:09 PM |
Title |
RE: mitsubishi vs60va2 bowed screen on top & bottom |
Message |
| Having the same problem but so far no one seems to have asuggestion on what might cause the problem.
Look like the posted problem was in August - has anyone found asolution or seen this problem?
Thanks |
|
Submitted By |
Carol
|
Date Posted |
11/23/2003 4:34:30 PM |
Title |
RE: mitsubishi vs60va2 bowed screen on top & bottom |
Message |
| I have had problems in pin cushion stand up board in front of deflection board there are 2 caps that go bad on that board. I don't know if this is the same set. Henry |
|
Submitted By |
james
|
Date Posted |
6/20/2004 12:50:55 AM |
Title |
RE: mitsubishi vs60va2 bowed screen on top & bottom |
Message |
| You will probably find that you have bad convergence outputs or leaky capacitors on that board.Don't turn any controls on convergence board until I.C.'s and leaky capacitors have been changed. You will save a headache. Jim Daly |
|
|
Repairhelper Archives - Please note that this bulletin board is repairhelpers archived material and as such messages can no longer be replied to, but please feel free to browse this board for possible remedies to your repair questions.
Please goto Repairhelper.com to view our current 'Active' repair assistance board where you can post your own questions and browse our latest mssages/ replies.
|
